Equipment & Engineering Inc.
Fully electrical/ hydraulic pump operated system which is able to lift vehicles of varying sizes. (trucks, buses, R/V's etc.). With our two differing model types of either a two or three post adjustable lifts you can easily size up the pick up points to adjust to each axle. The adjustable post(s) will make, your shop more versatile. With adjustable support saddles on each super-structure on each post you can lift on most any axle type. With no obstructions around the lift you are ablt to reach everything quickly and easily and get the vehicles back on the road quickly and efficiently.
|
 |
|
||
Inground Lift Features
|
||
|
||
 |
 |
 |
 |
 |
 |
All operating control valves are of the dead-man type, returning to the closed position when released. The standard location for controls is at floor level to the right side (passenger side) to allow the operator to visually check positioning of the superstructures and adaptors to the contact points of the vehicle to be raised. Wall-mounted controls and control console are available as optional extras. |
They're fast, simple and completely reliable. Standard movement is made with a simple chain and ratchet assembly under the floor plate. Simple control over where you want the movable post to be. Available in the following drive types: 1. "Z" hydraulic motor chain drive |
Supplied, capable of sustaining the lifting capacity of each post and are available in Multiposition leg only "X" Automatic latch engagement at 3 inch increments over the full rise of the piston. Disengagement for lowering is controlled by pneumatic push-button valve at the control box or electric push button on a pendant control. |
 |
 |
 |
 |
 |
 |
Are designed to pick up most buses and trucks. Special adaptors can be supplied to suit customers' requirements. |
The standard range of adjustment is 102" (2951 mm), additional range available in equal increments of 12" (305 mm) |
Equipment supplied is the front pit frame, (centre pit frame if ordered) rear pit form and control box frames with covers, cylinder assemblies with hard chrome-plated piston and corrosion protected casings,locking legs, flexible front hose, control valves, oil reservoir with electric power unit. |
 |
 |
 |
 |
 |
 |
• Remote control console • Wall-mounted controls • Recessed front superstructure • Retractable sliding covers • Locking legs • Power spotting |
Can be supplied to operate one to five lifts. Power units consist of one or more positive displacement pumps coupled to one or more electric motors with suction filter, relief valve and pressure gauge all factory mounted on an oil reservoir of sufficient G.P.M., PSI and capacity to raise the lifts. |
Stackable height adapters give a heavy duty inground unit the versatility to pick up passenger cars and light trucks. They come in several different heights and can be mixed and matched to fit the appropriate application. |
Low Pressure Inground Models
|
|
| MCZC210LPEQ (50,000 lb total Capacity) |
MCZC28-210LPEQ (56,000 lb total Capacity) |
2MCZC310LPEQ (75,000 lb total Capacity) |
 |
 |
 |
- 10 5/8" front movable post. (25K)
|
- 10 5/8" front movable post. (28K Capacity)
|
- Two 10 5/8" movable posts (25K ea.)
|
|
||
| 2MCZC28-310LPEQ (84,000 lb total Capacity) |
MCZC1012LPEQ (60,000 lb total Capacity) |
MCZC212LPEQ (70,000 lb total Capacity) |
|
 |
|
- Two 10 5/8" movable posts (28K)
|
- One 10 5/8" movable posts (25K Capacity)
|
- One 12 5/8" movable posts (35K Capacity)
|
|
||
| 2MCZC312LPEQ (105,000 lb total Capacity) |
MCZC310LPEQ (75,000 lb total Capacity) |
|
 |
 |
|
- Two 12 5/8" movable posts (35K Capacity ea.)
|
- One 10 5/8" movable posts (25K Capacity)
|
|
|
||
High Pressure Inground Models |
||
MCZC210HP (50,000 lb total Capacity) |
MCZC28-210HP (56,000 lb total Capacity) |
MCZC32-210HP (64,000 lb total Capacity) |
 |
 |
|
- One 10 5/8" movable posts (25K Capacity) |
- One 10 5/8" movable posts (28K Capacity)
|
- One 10 5/8" movable posts (32K Capacity)
|
|
||
| MCZC310HP (75,000 lb total Capacity) |
2MCZC310HP (75,000 lb total Capacity) |
MCZC28-310HP (84,000 lb total Capacity) |
|
|
 |
- One 10 5/8" movable posts (25K Capacity)
|
- Two 10 5/8" movable posts (25K Capacity)
|
- One 10 5/8" movable posts (28K Capacity)
|
|
||
| MCZC32-310HP (96,000 lb total Capacity) |
2MCZC28-310HP (84,000 lb total Capacity) |
2MCZC32-310HP (96,000 lb total Capacity) |
|
|
|
- One 10 5/8" movable posts (32K Capacity)
|
- Two 10 5/8" movable posts (28K Capacity ea.)
|
- Two 10 5/8" movable posts (32K Capacity ea.)
|
|
||
| MCZC1012HP (72,000 lb total Capacity) |
PKDT16 (16,000 lb total Capacity) |
|
|
 |
|
- One 10 5/8" movable posts (32K Capacity ea.)
|
Our 2 post/inground hybrid - High pressure system (available in low)
|
|
|
||
Home - Contact Us - News
__
__
