PKS Inground Hydraulic Heavy Duty Truck and Bus Lifts

Inground Lift Features

Controls

lifts

All operating control valves are of the dead-man type, returning to the closed position when released. The standard location for controls is at floor level to the right side (passenger side) to allow the operator to visually check positioning of the superstructures and adaptors to the contact points of the vehicle to be raised. Wall-mounted controls and control console are available as optional extras.

Power Spotting

lifts

They're fast, simple and completely reliable. Standard movement is made with a simple chain and ratchet assembly under the floor plate. Simple control over where you want the movable post to be. Available in the following drive types:

1. "Z" hydraulic motor chain drive
2. "ZA" air motor chain drive

Locking Legs

lifts

Supplied, capable of sustaining the lifting capacity of each post and are available in Multiposition leg only "X" Automatic latch engagement at 3 inch increments over the full rise of the piston. Disengagement for lowering is controlled by pneumatic push-button valve at the control box or electric push button on a pendant control

Super Structures

lifts

Are designed to pick up most buses and trucks. Special adaptors can be supplied to suit customers' requirements

.

Wheelbase Range

lifts

The standard range of adjustment is 102" (2951 mm), additional range available in equal increments of 12" (305 mm)

Standard Equipment

lifts

Equipment supplied is the front pit frame, (centre pit frame if ordered) rear pit form and control box frames with covers, cylinder assemblies with hard chrome-plated piston and corrosion protected casings,locking legs, flexible front hose, control valves, oil reservoir with electric power unit.

Available Options

lifts

Remote control console
Wall-mounted controls
Recessed front superstructure
Retractable sliding covers
Locking legs
Power spotting

Power Units

lifts

Can be supplied to operate one to five lifts. Power units consist of one or more positive displacement pumps coupled to one or more electric motors with suction filter, relief valve and pressure gauge all factory mounted on an oil reservoir of sufficient G.P.M., PSI and capacity to raise the lifts.

Height Adapters

lifts

Stackable height adapters give a heavy duty inground unit the versatility to pick up passenger cars and light trucks. They come in several different heights and can be mixed and matched to fit the appropriate application.

Low Pressure Inground Models

MCZC210LPEQ

(50,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (25K Capacity)
One 10 5/8" Rear fixed and recessed post. (25K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC28-210LPEQ

(56,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (28K Capacity)
One 10 5/8" Rear fixed and recessed post. (28K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

2MCZC310LPEQ

(75,000 lb total Capacity)

lifts

Two 10 5/8" front movable post. (25K Capacity ea.)
One 10 5/8" Rear fixed and recessed post. (25K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

2MCZC28-310LPEQ

(84,000 lb total Capacity)

lifts

Two 10 5/8" front movable post. (28K Capacity ea.)
One 10 5/8" Rear fixed and recessed post. (28K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC1012LPEQ

(60,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (25K Capacity)
One 10 5/8" Rear fixed and recessed post. (35K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC212LPEQ

(70,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (35K Capacity)
One 10 5/8" Rear fixed and recessed post. (35K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

2MCZC312LPEQ

(105,000 lb total Capacity)

lifts

Two 10 5/8" front movable post. (35K Capacity ea.)
One 10 5/8" Rear fixed and recessed post. (35K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC310LPEQ

(75,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (25K Capacity)
Dual 10 5/8" Rear fixed and recessed post. (50K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

High Pressure Inground Models

MCZC210HP

(50,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (25K Capacity)
One 10 5/8" Rear fixed and recessed post. (25K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC28-210HP

(56,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (28K Capacity)
One 10 5/8" Rear fixed and recessed post. (28K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC32-210HP

(64,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (32K Capacity)
One 10 5/8" Rear fixed and recessed post. (32K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC310HP

(75,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (25K Capacity)
Dual 10 5/8" Rear fixed and recessed post. (50K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

2MCZC310HP

(75,000 lb total Capacity)

lifts

Two 10 5/8" front movable post. (28K Capacity ea.)
One 10 5/8" Rear fixed and recessed post. (25K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

2MCZC28-310HP

(84,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (28K Capacity)
Dual 10 5/8" Rear fixed and recessed post. (56K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC32-310HP

(96,000 lb total Capacity)

lifts

One 10 5/8" front movable post. (32K Capacity)
Dual 10 5/8" Rear fixed and recessed post. (64K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

2MCZC28-310HP

(84,000 lb total Capacity)

lifts

Two 10 5/8" front movable post. (28K Capacity ea.)
One 10 5/8" Rear fixed and recessed post. (28K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

2MCZC32-310HP

(96,000 lb total Capacity)

lifts

Two 10 5/8" front movable post. (32K Capacity ea.)
One 10 5/8" Rear fixed and recessed post. (32K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

MCZC1012HP

(72,000 lb total Capacity)

lifts

Two 10 5/8" front movable post. (32K Capacity ea.)
One 10 5/8" Rear fixed and recessed post. (40K Capacity)
Adjustable pick up adapters
Double chain hydraulic spotting system
3/8" Thick cover plates
Locking leg with automatic air latch system
Front frame made from 7/8" thick mast channel.
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

PKDT16

(16,000 lb total Capacity)

lifts

Two post Inground Hybrid
High pressure system (available in low)
10 5/8" front and rear fixed
3 stage telescoping arms
Locking leg with automatic air latch system
Chrome plated pistons
Fibreglass coated cylinder casings
Low profile saddle.
Power unit and controls included

lifts

lifts

lifts

lifts

Home 2-Post 4-Post Mid-Rise Scissor Inground Mobile Custom News Contacts Specs