PKS Equipment & Engineering Inc.

Our light duty 2 post lifts use hydraulic equalization to their two cylinders for synchronized lifting eliminating the need for chains screws cables or pulleys, the carriages slide thru the columns on either 4" roller bearings in 7/8" fork lift mast channels. Our heavier duty 2 post lifts use electro-hydraulically equalized PLC controls that synchronize the two columns during the lift's full travel.

Most of our sets of 2 post lifts are constructed with heavy duty 7/8" fork lift mast channels and utilize three stage swing arms with stackable height adapters. Lifting height for our lighter duty lifts are 72" regular lifting height or 81" by using the height adapters, and for the heavy duty lifts 73" regular height with a possible 85" using the height adapters.

Height Adapters 7/8" Fork Lift Mast Channels Hydraulic Column Synchronization PLC Controls

PK10B (10,000 lb Capacity)

Hydraulically equalized lifting
3 Piece telescopic extendable arms
Available in symmetric and asymmetric design
Velocity fuse safety valve in both cylinder ports
Overhead sensor to protect vehicle from topping out
Available with fork lift mast channels and roller bearings or ultra-high molecular plastic sliding blocks.

________________________________________________________________________________________

PK12B (12,000 lb Capacity)

Hydraulically equalized lifting
3 Piece telescopic extendable arms
Available in symmetric and asymmetric design
Velocity fuse safety valve in both cylinder ports
Overhead sensor to protect vehicle from topping out
7/8" Fork lift mast channel with 4" roller bearings

________________________________________________________________________________________

PK16 (16,000 lb Capacity)

________________________________________________________________________________________

PK18 (18,000 lb Capacity)

Hydraulically equalized lifting
3 Piece telescopic extendable arms
Available in symmetric and asymmetric design
Velocity fuse safety valve in both cylinder ports
7/8" Fork lift mast channel with 4" roller bearings
Overhead sensor to protect vehicle from topping out
(PLC Controled column synchronizing is optional)

________________________________________________________________________________________

PK20 (20,000 lb Capacity)

________________________________________________________________________________________

PK22 (22,000 lb Capacity)

PLC controlled electro-hydraulically equalized lifting
3 Piece telescopic extendable arms
Available in symmetric and asymmetric design
Velocity fuse safety valve in both cylinder ports
7/8" Fork lift mast channel with 4" roller bearings